Model 3400: Large Work Area Desk
3400 RM Open - Swing Away Manual Lift in the up position.
*Please note; the Swing-Away Manual Lift requires the sewing machine be bolted to the lift deck. Interested parties should verify their machine has bolt-on capability on the bottom of their machine.
3400 RM (closed)
The Faux-Drawer front (under the machine) is easily removable for access to the bobbin or use of a knee lever if use is obstructed.
Adjusting the lowered lift height (Insert position)
On the bottom of the lift deck, where the machine sits, there are 3 bolts with nuts attached (on top of the bolts are gray caps). The lift deck Insert position is raised and lowered by these bolts. It is recommended to remove or at least support the sewing machine while adjusting the lift deck position. To lower the lift deck, unscrew the bolts until the lift deck is at the required height and then tighten the nuts up against the bottom of the lift deck to lock in place. If the nuts are already locked they will need to be loosened before the bolts can be loosened as in the case that the store set the lift deck height already.
- Insert II System
- Swing-Away Manual Lift
Removable Faux-Drawer Front
- Contour Laminate Fronts and Leaves
- Notions Tray
- Auto Leaf Support
- Measuring Tape
- Drawer Glide
- #47 Quilt Leaf (42" Wide x 19 3/4" Deep)
- Notions Tray (for inside drawer)
- Insert - Machine Specific
- Colors: Rustic Maple
- 42" Wide (84" open) x 19 3/4" Deep x 30 1/4" High
- Opening is 24" by 11 5/8"
- Order Insert 24x12.5